|
|
|
|
Install the generator as close as possible to the transfer switch. REMEMBER THAT LAWS OR CODES MAY REGULATE THE DISTANCE AND LOCATION. |
|
|
|
|
|
Generac® Transfer Switches
The transfer switch monitors utility power and signals the generator to start when utility power is interrupted. When utility power returns, the transfer switch returns the electrical load from the generator back to the utility. This ensures your most important electrical loads are powered, within seconds, even when you're away. Unlike other brands, GENERAC includes an automatic transfer switch as standard equipment with all air-cooled models.
This transfer switch is the difference between a truly automatic generator set and just another generator. No toggles to flip, no knobs to turn, no extension cords to run when you lose utility power. You will have the comfort and peace-of-mind knowing that your GENERAC standby generator does everything for you... automatically.
- A two pole, 100-amp automatic transfer switch with integrated load center is standard equipment on all air-cooled models up to 17 kW
These transfer switches are also available for liquid-cooled models or as an alternative to be purchased separately.
$499.00
Generac Transfer Switch - RTSR100A3 |
|
Model Number |
RTSR100A3 |
No. of Poles |
2 |
Current Rating (amps) |
100 |
60 Hz Phase |
Single |
Voltage Rating (VAC) |
250 |
Utility Voltage Monitor (fixed) |
Pickup |
75% |
Dropout |
65% |
Return to Utility |
15 seconds |
Exerciser 15 min. weekly * |
Standard |
CUL 1008 Listed |
Standard |
Dimensions (H" x W" x D") |
20 X 14.875 X 7.25 |
Enclosure Type |
NEMA 3R Outdoor Rated |
Unit Wt. (lbs.) |
35 |
|
Generac Transfer Switch - RTS-E-100A3-CSA |
|
Model Number |
RTS-E-100A3-CSA |
No. of Poles |
2 |
Current Rating (amps) |
100 |
60 Hz Phase |
Single |
Voltage Rating (VAC) |
250 |
Utility Voltage Monitor (fixed) |
Pickup |
75% |
Dropout |
65% |
Return to Utility |
15 seconds |
Exerciser 15 min. weekly * |
Standard |
CSA Listed |
Standard |
Dimensions (H" x W" x D") |
21 X 16 X 8 |
Enclosure Type |
NEMA 3R Outdoor Rated |
Unit Wt. (lbs.) |
22.5 |
|
$999.00
Generac Transfer Switch - RTSR200A3 |
|
Model Number |
RTSR200A3 |
No. of Poles |
2 |
Current Rating (amps) |
200 |
60 Hz Phase |
Single |
Voltage Rating (VAC) |
250 |
Utility Voltage Monitor (fixed) |
|
Pickup |
75% |
Dropout |
65% |
Return to Utility |
15 seconds |
Exerciser 15 min. weekly * |
Standard |
CUL 1008 Listed |
Standard |
Dimensions (H" x W" x D") |
20 X 14.875 X 7.25 |
Enclosure Type |
NEMA 3R Outdoor Rated |
Unit Wt. (lbs.) |
35 |
|
Generac Transfer Switch - RTS-E-200A3-CSA |
|
Model Number |
RTS-E-200A3-CSA |
No. of Poles |
2 |
Current Rating (amps) |
200 |
60 Hz Phase |
Single |
Voltage Rating (VAC) |
250 |
Utility Voltage Monitor (fixed) |
|
Pickup |
75% |
Dropout |
65% |
Return to Utility |
15 seconds |
Exerciser 15 min. weekly * |
Standard |
CSA Listed |
Standard |
Dimensions (H" x W" x D") |
32 X 14 X 9 |
Enclosure Type |
NEMA 3R Outdoor Rated |
Unit Wt. (lbs.) |
39 |
|
$3,070.00
Generac Transfer Switch - RTSR400A3 |
|
Model: RTSR400A3
Current Rating: 400AMP
RTS transfer switches are integrated with the R-Series digital controller and operate only with units 7kW-60kW. This model features a water-proof NEMA 3R enclosure. Also, the switch's phase and voltage must match that of the generator it is connected to.
|
|